Do you have a technical support number for Phillips Magnavox tv's? I can not get it programed for Direct Satellite TV

More Questions. Additional questions in this category.

• 

  i Have an old magnavox star crt tv. what would cause it to stop turning on.sometimes it turns on for a couple of seconds then shuts off
  by rex.smalley on June 17th, 2011 | 1 person likes this

• 

  I Have A 48" Philips Magnavox Projection TV Model # 8P4844C101. The Picture Is Really Blurry & Everything Looks Like It "glows".
  by stemohon on August 22nd, 2010 | 1 person likes this

• 

  I have a really old (1988) Magnavox TV, model CH3930 BL. This set requires you to tune each channel and select a channel number to display, before you can use the UP and DOWN channel selector buttons on the user panel. Does anyone ha
  by answerbagfan on July 2nd, 2009 | 1 person likes this

• 

  Magnavox MS3450C321 "buzzes" when graphics come on screen. All others in home OK. ON Sat, Dish net. Have adjusted all audios no help.
  by Anonymous on October 3rd, 2009 | 1 person likes this

• 

  I have a really old (1988) Magnavox TV, model CH3930 BL. This set requires you to tune each channel and select a channel number to display, before you can use the UP and DOWN channel selector buttons on the user panel. Does anyone have a user guide?
  by answerbagfan on July 2nd, 2009 | 1 person likes this

• More More Magnavox TVs See only professionally researched More Magnavox TVs questions