by Christine Venus on January 12th, 2009

Christine Venus

Question

Help answer this question below.

How do i enable my on board sound?

  • Like
  • Report

Answers. 4 helpful answers below.

  • by Michael on January 18th, 2009

    Michael

    Step 1: Your onboard sound-chip must be enabled in your motherboard's BIOS.
    IF disabled: no amount of installing drivers, etc will enable that chip to function.
    In fact, that sound chip wont even appear in device manager, etc if disabled.

    Typically this BIOS option is set to enabled from the factory as most have no need
    to change it unless they're installing a sound card (functions better than the chip).
    I've also seen where "Windows Audio Service" wasn't set properly in services.msc.
    Verifying the BIOS setting is step 1.  Post back if you need further instructions.
    We're all here to help, good luck!

    • Like
    • Report

    No comments. Post one | Permalink

  • by 8 Jan 2004-10 Dec 2009 on January 14th, 2009

    8 Jan 2004-10 Dec 2009

    I got mine working merely by installing the AC97 driver from my WinXP CD.

    • Like
    • Report

    7 comments | Post one | Permalink

  • by l_l on January 12th, 2009

    l_l

    You have to load the drivers for it...

    • Like
    • Report

    4 comments | Post one | Permalink

  • by G_tech on January 15th, 2009

    G_tech

    Well go to control panel>system>hardware>device manager>look for any yellow? (audio)
    if you see one the like the guys said the drivers are missing and if you do not have the CD say the motherboard as the audio could be on board audio or CD for a audio card if its separate.
    You can run a FREE program called: Belarc which you can go to google and download and run it and it will tell you what you have installed on you system
    Also you can run a FREE program called Radarsync which finds & downloads driver & installs them for you, it finds about 90% of most all common drivers out there.
    Also check on control panel>sounds and audio devices>volumne tab>make sure that the mute is not checked

    NEED TO FIND YOUR DRIVERS?
    Go http://www.radarsync.com/ this software will find them and update them for you all for free, just click on the red download button (start free download free version) 1.18 MB is the size of file just choose where you would like to save it too.
    (you may also need this file Microsoft NET Framework 2.0)
    http://www.microsoft.com/downloads/Search.aspx?displaylang=en#

    No comments. Post one | Permalink

Want to attach an image to your answer? Click here.

Did this answer your question? If not, then ask a new question or create a poll.

More Questions. Additional questions in this category.

You're reading How do i enable my on board sound?

Follow us on Facebook!

Related Ads

ANSWERBAG BUZZ

How to switch to onboard sound
How do i turn on my onboard sound
How to change to onboard sound
Change to onboard sound
How to change onboard sound