Ask a Question
or
Create a Poll
  1. Home /
  2. Questions /
  3. Autos & Motorcycles
  4. / Car Makes & Models
  5. / Makes A - H
  6. / Chevrolet Models
  7. / Chevrolet Trucks And SUVs
  8. / Chevrolet Tahoe

by inthemountains on December 10th, 2008

inthemountains

Question

Help answer this question below.

Driver's side panel, the switches don't work to lower any of the windows, the switches to lock all doors and lock all windows work.I had someone look at it, and what I would call the circuit board for all the switches got wet, what is the part name?

Share:
Other

Answers. 1 helpful answer below.

  • by Moosemose on December 10th, 2008

    Moosemose

    Most likely called "Switch Board" if it can be removed do so. U should be able to use an "Electronic Parts Cleaner" (Auto Zone) to thoroughly clean the board & switches using an old tooth brush as needed. After cleaning use compressed air to dry it off then use an "Ohm Meter" to test the switches. If U find bad Switches or a Relay, try the Internet to find replacements or a good "Electronics Part Store". Use a soldering iron & "Solder Wick" to remove parts from the board & then re-solder new ones. John

    1 comment | Post one | Permalink

Want to attach an image to your answer? Click here.

Did this answer your question? If not, then ask a new question or create a poll.

More Questions. Additional questions in this category.

You're reading Driver's side panel, the switches don't work to lower any of the windows, the switches to lock all doors and lock all windows work.I had someone look at it, and what I would call the circuit board for all the switches got wet, what is the part name?

Follow us on Facebook!

Related Ads

Related Questions

Professionally Researched

ANSWERBAG BUZZ

Tahoe driver s door won t lock
Window switches got wet now they dont work
Baby co sleeping bed for 7 months old
Chevy tahoe windows dont roll down
Window switches got wet no longer work

Answerbag

a Demand Media company