Ask a Question
or
Create a Poll
  1. Home /
  2. Questions /
  3. Electronics
  4. / Satellite Television
  5. / Dish Network

by Frontiesman on December 25th, 2006

Frontiesman

Question

Help answer this question below.

We own a SuperScan TV purchased at SEARS, we have attempted to use the Dish NEtwork second remote but Dish Network cannot locate the Remote Access codes because SuperScan does not release them? Does anyone know the remote access codes for the superscan TV

  • Like
  • Report
Share:
Other

Answers. 5 helpful answers below.

  • by ODENSHORES on December 16th, 2008

    ODENSHORES

    I have the superscan TV/VCR/DVD combo from Sears and the Brighthouse cable remote works with the code 1944.

    • Like
    • Report

    No comments. Post one | Permalink

  • by Anonymous on November 7th, 2008

    Anonymous

    we have direct tv and i used the code for the Admiral brand tv with mine and it works fine. Good luck

    • Like
    • Report

    No comments. Post one | Permalink

  • by tjatherton on December 25th, 2006

    tjatherton

    If the device code for your device is not listed in the tables, follow these procedures for the DishNetwork remote to automatically find your code.
    1. Turn on the TV.
    2. Press and hold the mode button until all the other mode buttons light up, and then let go of the button.
    3. Press the * (star) button.
    4. Press the POWER button.
    5. Press the (either up or) down arrow button repeatedly, somewhat slowly, until the device turns off. (This may be more than 100 times but do not go so fast that you do not see the TV turn off at any particular point.)
    6. Press the POUND (#) button.
    7. Turn the device back on and try some other buttons to make sure they work. If not:

    8. Repeat this procedure until you've tried all the codes that operate all the functions.

    To check what the code is:
    1. Press and hold the mode button until all the other mode buttons light up, and then let go of the button. The mode button flashes.
    2. Press the POUND (#) button twice. Watch the mode light to determine your code. The mode button flashes the number for each digit of the device code, with a pause between the groups of flashes. A quick flash is for zero.
    (For example, if the code is 570, the mode button flashes five times, pauses, flashes seven times, pauses and flashes once quickly.)

    • Like
    • Report

    No comments. Post one | Permalink

  • by tammy on December 21st, 2008

    tammy

    we have a super scan tv vcr dvd i need the code so i can program it to a remote

    No comments. Post one | Permalink

  • by Yeahright101 on September 11th, 2011

    Yeahright101

    Sears will bait and switch a superscan with any and every name brand TV that is purchased that blanks out. They will sell you a Sony the craps out in 2 weeks then give you a superscan to replace it. You are so tired at that point of the trouble and glad to have a TV, that you don't push the issue.

    Then your Crapper Scan starts giving green pixels, nver codes and universal remotes and you can't sell it because you now own a no brand.

    No comments. Post one | Permalink

Want to attach an image to your answer? Click here.

Did this answer your question? If not, then ask a new question or create a poll.

More Questions. Additional questions in this category.

You're reading We own a SuperScan TV purchased at SEARS, we have attempted to use the Dish NEtwork second remote but Dish Network cannot locate the Remote Access codes because SuperScan does not release them? Does anyone know the remote access codes for the superscan TV

Follow us on Facebook!

Related Ads

Related Questions

Professionally Researched

ANSWERBAG BUZZ

Superscan tv
Who makes sears super scan
Superscan tv code dish
Super scan tv
Superscan tv codes

Answerbag

a Demand Media company