ANSWERS: 5
-
All you need is a sub or pair of subs, a box, an amp to drive them, a standard amp install kit, a pair of RCA's, and a line output converter. It is a basic install. Hook the amp up as normal, with power and ground. Your factory amp is in the driver's rear quarter panel, in your trunk. You can grab the remote turn on and speaker leads for the line out converter from there. Make sure the connections you make are clean, soldered or crimped, and do not disconnect either side of the factory wire (the wire still needs to send signal to the speakers from the factory amp). Use the L.O.C. to change the speaker signal leads to RCA, and connect the RCA cables from the LOC to the terminals on the amp. When it's all connected, you should end up with your factory sound system, and a bass output upgrade.
-
I dunno. Are you capable?
-
Yes you can. I recently did it with my 2000 Taurus. If you need help hooking it all up email me. brandon_laabs@yahoo.com
-
the factory sys doesn't have enough amperage to push subs, you can use the fac system but still need an amp
-
you can hook up 2 subwoofers to ANY car. you're going to need an amp though, and someone who knows what they're doing
Copyright 2023, Wired Ivy, LLC

by 