by negativespace000 on October 9th, 2008

Question

Help answer this question below.

What frequency should I set my S/PDIF digital sound card output to? I have 7.1 channel receiver, use digital coaxial to output sound signal from computer to receiver. Computer set to output 7.1 channel, currently 96KHz. Should I set to 44.1, 48, 96, 192?

Like
Report

Share:: Facebook; Twitter; Other

Answers. 1 helpful answer below.

by theGuffa on October 13th, 2011
Test the different frequencies to see if you can hear a significant difference. If not, just set it to the highest frequency that your sources will have, or a step higher to have a bit of leeway. Most standard quality recordings are 44.1 or 48 kHz, so you could go for 48 or 96.

For some reason I have to set my Realtek card output to 192 kHz, or it sounds like CRAP. Not just some subtile difference that you can barely hear, but a completely different sound. You will easily hear the difference if your card is the same.
Comments
Add a comment...
- Like
- Report
No comments. Post one | Permalink

Did this answer your question? If not, then ask a new question or create a poll.

More Questions. Additional questions in this category.

Is Lebanese pop music the cure for the common burqua?
by Want To Sleep With A Miner on September 4th, 2011 | 1 person likes this
Senile man climbs my roof at night, what do I do?
by Immogene on November 8th, 2010 | 5 people like this
How to become better dot net developer ?
by coolneeraj22 on January 5th, 2011 | 1 person likes this
Where can I find a list of Lebanese pop music from 1994?
by Want To Sleep With A Miner on September 2nd, 2011 | 1 person likes this
My surround sound system xv-dv313 and s-dv313 after a while of playing starts whistling in the background
by Alan_W3223 on November 6th, 2010 | 1 person likes this
More More Audio Receivers in General See only professionally researched More Audio Receivers in General questions

You're reading What frequency should I set my S/PDIF digital sound card output to? I have 7.1 channel receiver, use digital coaxial to output sound signal from computer to receiver. Computer set to output 7.1 channel, currently 96KHz. Should I set to 44.1, 48, 96, 192?

Follow us on Facebook!

Related Ads

Professionally Researched

ANSWERBAG BUZZ

Spdif frequency

Spdif freq

S pdif frequency

Spdif 48 96 output which

What should spdif be set on

About Us

About Answerbag

Sitemap

Professionally Researched Questions

Legal

Privacy Policy

Terms of Use

Disclaimer

Ad Choices
Follow Us on Facebook

Answerbag.com
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!
Latest Tweet

What is the very worst thing you can do in an interview? http://t.co/3QoM2mLE

Follow Answerbag on Twitter!

Answerbag

Question

What frequency should I set my S/PDIF digital sound card output to? I have 7.1 channel receiver, use digital coaxial to output sound signal from computer to receiver. Computer set to output 7.1 channel, currently 96KHz. Should I set to 44.1, 48, 96, 192?

Answers. 1 helpful answer below.

Comments

Did this answer your question? If not, then ask a new question or create a poll.

More Questions. Additional questions in this category.

Follow us on Facebook!

Related Ads

Related Questions

I have realtek HD sound card on my computer, digital RCA output set for 7.1, and I have a 7.1 receiver and speakers. When I run a test on my computer, why can't I hear the rear, side, center, and subwoofer channels on my speakers? This is so annoying!

Just bought a new ps3 slim and no digital output will come out of either the HDMI or optical output. All adjustments set properly in menu. Performed system upgrade & firmware upgrade and still no digital sound, only analog to receiver.

I have a TV with a built in DVD player.The only sound output it has is normal RCA connectors,the red and white.I want to watch movies with 5.1 sound.If I use the RCA-5.1 adapter it came with, will it be 5.1 sound if I set the DVD to it or still stereo?

What is the difference beetween PCM and bitstream? I know the main differences i just want to know what to set my DVD player and PS3 to so i can get the best quality sound on my 5.1 receiver.

Design a frequency counter that measures input frequencies between 0 and 127 hz.the input waveform is a periodic TTl signal but it is not necessarily a sqaure wave.use sample interval of 1S.the measured frequency should be output in binary to LEDs.

Professionally Researched

How do I connect& set up a 7.1 PCI sound card?

Can Phillips'digital audio output coaxial cable fit inside Blu-ray players?

What is a coaxial digital output?

Can you use a 7.1 A/V receiver with a 6.1 speaker setup?

Can I use 5 speakers on a 7.1 AV receiver?

ANSWERBAG BUZZ

Answerbag.com
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!

Question

What frequency should I set my S/PDIF digital sound card output to? I have 7.1 channel receiver, use digital coaxial to output sound signal from computer to receiver. Computer set to output 7.1 channel, currently 96KHz. Should I set to 44.1, 48, 96, 192?

Answers. 1 helpful answer below.

Comments

Did this answer your question? If not, then ask a new question or create a poll.

More Questions. Additional questions in this category.

Follow us on Facebook!

Related Ads

Related Questions

Professionally Researched

ANSWERBAG BUZZ

Answerbag.com Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!

Answerbag.com
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!