- NEW!
All about the KTM motorcycle brand
Can a Scott's steering damper be mounted at the same time as a KTM gps/pda bag and mount on a 990 Super Duke?
by SuperDookieRaf on July 16th, 2010
|
no answers
|
in KTM
Where are KTM motorcycles built?
by Answerbag Staff on July 10th, 2010
|
one answer
|
in KTM
Where are KTM motorcycles built?
by Answerbag Staff on July 10th, 2010
|
one answer
|
in KTM
What country makes ktm motorcycles?
by Answerbag Staff on April 7th, 2010
|
one answer
|
in KTM
What country makes ktm motorcycles?
by Answerbag Staff on April 7th, 2010
|
one answer
|
in KTM
Will a crankshaft from a newer ktm 125sx like an 03 to 06 fit in a 99 ktm 125sx?
by osurocker on October 25th, 2009
|
one answer
|
in KTM
Does anyone know of a website where i can decode the vin on my ktm?
by osurocker on October 24th, 2009
|
no answers
|
in KTM
I have a 99 ktm 125sx that needs a new conecting rod bearing. Do i have to buy the whole crank assembly to replace this or just the bearing?
by osurocker on October 24th, 2009
|
one answer
|
in KTM
Besides "akrapovic" are there any other exhaust systems to fit a KTM SUPERDUKE 990?
by teapot on October 4th, 2009
|
no answers
|
in KTM
I own a ktm superduke 990 (2005),will a petrol tank off a 2007 model fit my bike
by teapot on September 27th, 2009
|
no answers
|
in KTM
I own a 2004 ktm 525 exc, my problem is i have broken off the bolt that holds the fuel tank to the frame , I drilled it out and stuffed the thread can i buy a replacement metal stalk to weld on,or any suggestions would be great. thankx.
by hoodoo on September 9th, 2009
|
no answers
|
in KTM
I have a ktm 50 sx sr. The bike will start, but then will shut off after a few mins. I recently changed out the water pump bearings, impeller, gasket, etc... gas is coming out of tank, air filter is clean, new plug, new gas, case oil changed, whats up?
by Hepdro on August 2nd, 2009
|
one answer
|
in KTM
Radiator thermostats will do A or B? A. Be either be fully open or fully closed base upon a specific temperature. B. Open varying amounts dependent upon varying temperature.
by xg5766 on July 24th, 2009
|
one answer
|
in KTM
My question is regarding an automotive thermostat in the cooling system between the engine and radiator. When the thermostat is operating correctly will it do A or B? A. be either be fully open or fully closed base up
by xg5766 on July 24th, 2009
|
one answer
|
in KTM
My 1999 ktm250 exc is spilling exhaust out from between the head and the cylinder even with new gaskets. Could this be a worped head or something that might just be cloged?
by ryanalan on June 13th, 2009
|
no answers
|
in KTM
I HAVE A 1990 250CC KTM EXC, I WANT TO KNOW WHAT OTHER KTM ENGINES WOULD FIT THIS BIKE?
by mike49608 on May 26th, 2009
|
no answers
|
in KTM
WHAT KIND OF HYDRAULIC CLUTCH FLUID DOES A KTM 200EXC 2003 USE
by KTMROASTER on April 29th, 2009
|
no answers
|
in KTM
Willany other (ktm250?) plastic fit a 02 ktm 300 mxc? im looking for whole kits in black
by dashit on March 2nd, 2009
|
no answers
|
in KTM
Will a 2008/09 ktm sxf250 exhaust fit a 2007 model?
by kae on February 3rd, 2009
|
no answers
|
in KTM
Will a 1991 ktm rim fit on a 1993 ktm?
by ted on December 15th, 2008
|
no answers
|
in KTM
What is the coldest tempature that you can run a two-stroke dirt bike in?
by Steak 652 on November 1st, 2008
|
one answer
|
in KTM
Who beleives KTM are the fastest and best motorbikes.
by jacko2424 on October 1st, 2008
|
no answers
|
in KTM
Hello. i recently got my son a 1997 ktm exc 125 road legal, i have now been told by a ktm dealer that they are only realy for racing and that i will be forever having mechanical problems needing engine rebuilds regularly, is he right?
by dogmanofdenstroude on September 22nd, 2008
|
one answer
|
in KTM
When a start me bike up and put it in gear it claps out but when a bumb it and ride it its ok and when a come 2 a stop with the bike still started with the cluch pulld in and its in 1st gear a can pull away so do u think a need new clutch plates
by mallalvzleigh on September 12th, 2008
|
no answers
|
in KTM
Whats the difference in steel clutch plates n friction clutch plates or do you need both ov them
by mallalvzleigh on September 12th, 2008
|
one answer
|
in KTM
Hi Recently bought second hand KTM 125 - 98 model. What would be the best fuel ratio to use?
by Smelly on June 8th, 2008
|
one answer
|
in KTM
How many hours of riding fun riding no racing before you should work on the engine of a KTM 525 XC?
by Zoffeg on January 19th, 2008
|
no answers
|
in KTM
Do you put the oil in the gas in a 95 ktm 300 exc 2 stroke or is there a place to put the oil and the bike mixes for you?
by CrashAddict on December 7th, 2007
|
one answer
|
in KTM
I have a 2003 ktm250sx and i was bleeding the back brakes on it. i didnt have the back tire on so there was no disc to stop, then i pressed the back brake, the piston shot out. the piston is in and now it wont close the pads. what do i do?
by Anonymous on June 21st, 2007
|
2 answers
|
in KTM