Hardwood.

What are the major kind of wood floor finishing are there?
by jo.anderson on August 21st, 2011 | no answers | in Hardwood

Can you use a sander to clean concrete floors?
by Answerbag Staff on June 12th, 2010 | one answer | in Hardwood

What are the benefits of wood flooring?
by jo.anderson on August 21st, 2011 | 3 answers | in Hardwood

How do I pick hardwood floor color?
by Answerbag Staff on June 21st, 2010 | one answer | in Hardwood

I live in Chicago. I have a house with oak floors. If I have them sanded up to what grit # will they use? 220? Without me asking for it.
by EJK56 on June 29th, 2011 | one answer | in Hardwood

How do I select a finish for my hardwood flooring...?
by jo.anderson on June 29th, 2011 | 2 answers | in Hardwood

How do I care my wood flooring...?
by jo.anderson on June 29th, 2011 | one answer | in Hardwood

What solvent based product will safely clean a 1950's shellaced hardwood floor{just removed carpet}? It doesn't need refinishing. Thanks
by my1950sorbust on March 7th, 2011 | 2 answers | in Hardwood

How do I pick hardwood floor color?
by Answerbag Staff on June 21st, 2010 | one answer | in Hardwood

I have maple select flooring (natural) in my 9 yr old house & has ambered in color. How do I match color closely in a new room?
by gkokos on April 23rd, 2010 | 2 answers | in Hardwood

Can i refinish hard wood floors commercially with just an occupational license?
by avery5563 on February 28th, 2010 | one answer | in Hardwood

How can I repair or refinish "bald spots" on a dark wood floor without refinishing the entire floor?
by Anonymous on September 22nd, 2009 | one answer | in Hardwood

How can I correct the incline of an old double pine floor that slants about 1 in. in 20 feet? I had planned on adding ¾ oak stripping to match new addition’s floor level. I found ¾ oak would work at one door but 1, 1/2" would be needed at second door.
by Anonymous on June 11th, 2009 | one answer | in Hardwood

Several years ago I built an addition with 3/4" oak strip flooring. The old section has a double floor of two layers of 3/4" strip pine. I planned to add new oak when I would remodal the old part and so built the surface of the new addition's oak floor 3/
by Anonymous on June 10th, 2009 | one answer | in Hardwood

Please help. how do i fix high heel dents in a wooden floor. is it possible to sand them down as they're only about 1mm deep or do i have to replace the whole floor?
by susanh on April 26th, 2009 | one answer | in Hardwood

Someone walked over my real wooden floor with stiletto heels. nightmare- holes all over the place. any ideas that will not cost £100s?
by natsgreenyer on April 13th, 2009 | one answer | in Hardwood

Would you put a thicker wood floor down next to tile or get a floor that is the same thickness?
by Anonymous on April 3rd, 2009 | 7 answers | in Hardwood

I am looking for Cane Furniture for my Garden, is it a good idea. Can anyone tell me some top Brands I can opt for?
by mac123 on February 16th, 2009 | one answer | in Hardwood

How do you solidify an old wood floor? There is a soft spot under the hardwood. Hardwood can't be removed as it's quite thin and over 100 years old. Any ideas?
by Ephraim on February 14th, 2009 | no answers | in Hardwood

When istalling a hardwood floor on concrete do you use a mebraine? Do you glue both sides of the membraine and is it a floating floor. do I use glue? If not nails? how wood I nail on concrete? Please help!
by Anonymous on January 27th, 2009 | 2 answers | in Hardwood

When I walk across the floor of my house, the dishes rattle in the cabinets. Should I get a contractor to look at the flooring?
by debodun on January 18th, 2009 | 2 answers | in Hardwood

I have wood floors. I'd like to reapply a coat of polyurethane. Do I have to re-strip my floor or can I just buff over the old polyurethane before applying?
by Adz3r0 on November 9th, 2008 | one answer | in Hardwood

I am trying to remove several screws in a very old hardwood floor. The screws have snapped and I'm left with less then a 1/4" of the screw above the floor. What can I use to remove them?
by Ephraim on October 27th, 2008 | 5 answers | in Hardwood

Best way to cut wood flooring next to base cabinets?
by Anonymous on October 7th, 2008 | one answer | in Hardwood

Do you have to leave the house if hardwood floors are sanded and refinished because of the varnish fumes?
by Taurus430 on October 5th, 2008 | one answer | in Hardwood

I have an engineered wood floor that is only a year old. Recently i noticed it is starting to rise so when i walk on it i have the effect of walking on waves ! What's going on?
by madangie on August 31st, 2008 | one answer | in Hardwood

I am putting hardwood on my steps. The first step does not have a wall on either side. How do I finish around the edge of the step?
by Anonymous on August 26th, 2008 | 2 answers | in Hardwood

What are the disadvantages of wood flooring in meat department?
by -Blur Blur Girl- on August 21st, 2008 | 5 answers | in Hardwood

What can I use on my hardwood floors to make them Shine?
by TjoeBaxter is Hot Yo on August 19th, 2008 | 7 answers | in Hardwood

If your wood floors split,(the kind you snap together and lay down),whatever its called,how can you repair that crack? the crack is in between two boards.
by disciple on July 25th, 2008 | 2 answers | in Hardwood

What type of wood do you think is the most attractive as flooring?
by Orangy Energy on May 28th, 2008 | 10 answers | in Hardwood

When sanding hardwood floors what grade sandpaper do you begin with? And what grade do you finish with?
by marsha on March 19th, 2008 | one answer | in Hardwood

We have solid chestnut floors in our house and want to strip and treat them so they are durable (we have a dog so it's going to get a lot of wear) Anyone know what to treat them with please?
by Britabroad on February 29th, 2008 | 4 answers | in Hardwood

In selecting wood flooring for the kitchen do you go one shade lighter then the cabinets or one shade darker?
by Baima2 on January 31st, 2008 | 3 answers | in Hardwood

Have squeaky hardwood floors. Bought the house 3+ years ago-was built in the '60s-floors/all in great condition-had carpet when bought, preferred hardwoods. In the last few months to a year, the floors have started squeaking-1/2 of house-should I worry?
by Anonymous One on December 27th, 2007 | 5 answers | in Hardwood

Can you lay wood flooring next to tile flooring? My entryway has tile and the dining room and stairs are on either side...can I put wood in the dining and stair areas?
by jules on July 25th, 2007 | 2 answers | in Hardwood

How hard is hardwood?
by odball on July 16th, 2007 | 3 answers | in Hardwood

I know we have wood floors under our carpet. I hate our carpet (it's sky blue) but I'm scared to rip all of it out and find out that the wood floors are in bad shape. Should I just suck it up and get to ripping?
by kidalbino on July 2nd, 2007 | 6 answers | in Hardwood

I may buy a house that has old hardwood flooring that is beyond repair. I want to cover it with new hardwood, but the old flooring is not exactly level in a few places. How do I go about leveling it without tearing out the old flooring?
by BrightLights on June 16th, 2007 | 2 answers | in Hardwood

How is engineered wooden flooring applied to concrete
by Anonymous on December 26th, 2006 | one answer | in Hardwood

Does anyone know how to install hardwood stair treads
by yellosnow on November 6th, 2006 | one answer | in Hardwood