Digital Light Processing.

What are some good free video editors besides Windows movie maker?
by slimNanny on August 13th, 2011 | no answers | in Digital Light Processing

by Anonymous on December 31st, 1969 | no answers | in

Mitsubishi WD 60735 DLP Television bulb went out, replaced with new. New bulb worked for a couple days, now it just went out too??
by sethoakley1923 on June 6th, 2010 | no answers | in More Digital Light Processing

ive got a 50 dlp samsung after about 5 or so minutes of watching it it turns off then imedately turns itself back on again any ideas thanks
by angel_21_212000 on January 23rd, 2010 | one answer | in More Digital Light Processing

I am getting some pink color on the skin tone colors on my screen can anyone tell me how to fix this problem?
by derek223 on January 11th, 2010 | 2 answers | in More Digital Light Processing

why is my 50'' dlp tv screen losing specific colors(red,green)
by freemon73 on December 21st, 2009 | 3 answers | in More Digital Light Processing

I have a samsung rear projection tv. The green is bowed to the middle of the screen. What would be the most likely solution to this problem? (2009-12-09)
by ezezlina on December 9th, 2009 | one answer | in More Digital Light Processing

I have a samsung rear projection tv. The green is bowed to the middle of the screen. What would be the most likely solution to this problem?
by ezezlina on December 9th, 2009 | no answers | in More Digital Light Processing

2004 misubitshi wd52525 im Done..!!! on Repairing IT..... parting out
by dave47 on December 6th, 2009 | no answers | in More Digital Light Processing

Panasonic pt-40lc12 powers off after 1 minute. red light blinks 4 times, goes steady and then blinks 4 times again. any thoughts?
by hossienda10 on December 5th, 2009 | no answers | in More Digital Light Processing

Have a Samsung HLN5065W1 tv. When I try to use the remote to change volume, a box appears on the screen that says "unavailable". I also cannot use the remote to turn it on or off. Any ideas? There is nothing in the book about this.
by We miss our girl! on November 29th, 2009 | no answers | in More Digital Light Processing

I have a Samsung HL-P4667 DLP television. After being on a while it will just shut off. I can turn it back on after a while. I have checked the fan inside and it seems to work properly. Anybody have an idea what is causing this.
by THSPORTS on November 29th, 2009 | 2 answers | in More Digital Light Processing

I own a Mitsubishi DLP Projection television. It has started to turn itself off and I have a fast blinking green light. I referred to the owners manual and have tried pushing the reset and I have also unplugged the set from the power source for about 15
by Anonymous on November 16th, 2009 | one answer | in More Digital Light Processing

I have a mitsubishi wD 52525 It has erratic vertical lines . after I repaired the bglod. what went wrong........
by dave47 on November 9th, 2009 | 2 answers | in More Digital Light Processing

I have a mitsubishi 52725 purchased in 2005 It has been trouble since the first day 7 repair tickets new light now the screen turned green probably $300 in repairs so far now Quote $400 for repair Should I repair it or Junk it.or sell it
by skippy on November 9th, 2009 | one answer | in More Digital Light Processing

How to access service menu for sagem axium hdd56b
by needhelp on November 8th, 2009 | no answers | in More Digital Light Processing

I have a Mitsu 62 DLP 1080p. I have connected a 1080P Blue Ray through the HDMI connections the blue ray player states on it's menu that my TV is not a compatible 1080p. It will play 1080i format through the player but not 1080p. How do I configure it
by Capn Ron on October 20th, 2009 | one answer | in More Digital Light Processing

I have a D52W19 tv and when I turn on the powere button it flashes a couple times then goes completly off
by DaveD. on October 20th, 2009 | no answers | in More Digital Light Processing

I have a 56 inch DLP. I was watching football on the main screen and baseball on the PIP, and switchingback and forth. Suddenly, the main screen turned gree. Audio is stil okay on the main screen and the PIP picture is still good. Any thoughts?
by Anonymous on October 12th, 2009 | no answers | in More Digital Light Processing

I have a pioneer 520hd that keeps popping then turns off as soon as i push power
by Anonymous on October 11th, 2009 | no answers | in More Digital Light Processing

I have a 60 inch Mitsubishi DLP and i have three spots that have smudges on the screen, i have had my friend who works for a company come and clean the lense as well as the mirror and they still are there, what do i need to replace to fix this or clean?
by gabers on October 5th, 2009 | 2 answers | in More Digital Light Processing

When selecting "Watch Tv" via the "activity" button on my remote the television switches to the Cable box which is connected via HDMI port 1 on the back of the television. The television switches to the cable source momentarily and I can view the channel
by Anonymous on October 3rd, 2009 | no answers | in More Digital Light Processing

I have a Toshiba DLP model 62hm84. I installed a new TOSHIBA TB25-LMP lamp with housing. The tv worked great for 1 week and the bulb went out so i returned it since it was a defective bulb. We got a new one and it went out again after replacing it w/ the
by bandgirl1111 on October 1st, 2009 | 3 answers | in More Digital Light Processing

Where is the best place to buy a bulb for my samsung DLP TV?
by STREETWISE on September 26th, 2009 | 3 answers | in More Digital Light Processing

I have a Mit. WD 52725 TV. the red lamp light comes on intermitently. It has a new lamp and looks fine. If the power supply can give same symptoms, control voltage to ballast board is not stable & shuts set, will the TV show a flashing red light code?
by Anonymous on September 25th, 2009 | no answers | in More Digital Light Processing

I have a Mit. WD 52725 TV. the red lamp light comes on intermitently. It has a new lamp and looks fine.
by Anonymous on September 25th, 2009 | 2 answers | in More Digital Light Processing

My Hitachi 50V500 has started outlining shadows and other parts of the image with what looks like green and red solarized outlines. Please help me, and tell me how I can fix the television myself. A picture is at http://i26.tinypic.com/a08ihf.jpg
by Anonymous on September 9th, 2009 | 2 answers | in More Digital Light Processing

I have a mitsubishitv wd52528 it was working just fine when the picture went out an now the timer light just keeps blinking. andd the tv keeps clicking like it is trying to turn itself back on
by intrepid810 on August 27th, 2009 | one answer | in More Digital Light Processing

I have a scenium HD61LPW165 and have sound and no picture can anyone help
by viper on August 20th, 2009 | 2 answers | in More Digital Light Processing

A gemstar 55" dlp tv after being on for 30 to 60 minutes begins to flash/flicker and after a while the picture tints a red/purple color but the picture can still be viewed.
by Anonymous on July 21st, 2009 | 2 answers | in More Digital Light Processing

Is Mitsubishi model no. WD-52631 a 1080p television
by Anonymous on July 18th, 2009 | one answer | in More Digital Light Processing

I have a Toshiba 62HM95 TV and need to replace the mirror. I found the screws to remove the screen on the top and sides but can't figure out how to remove the bottom.
by ChuckT on June 30th, 2009 | one answer | in More Digital Light Processing

I have a toshiba dlp tv the fan run all the time
by hinshaw on June 21st, 2009 | no answers | in More Digital Light Processing

I have i hdtv 1080p but its only saying its on 1080i how do i change this? Could to be the cable box
by boman614 on June 8th, 2009 | one answer | in More Digital Light Processing

I have a samsung dlp tv about 3 to 4 yrs. old. all of the sudden it turned off and it dosn't work. we have a new color wheel and bulb. all indicator lights are on nothing is blinking. also, it will not turn on. model #HL-P5063W
by meemers on May 25th, 2009 | one answer | in More Digital Light Processing

How dose the picture look on dlp with out hooked up to hdmi
by goodwill39 on May 21st, 2009 | no answers | in More Digital Light Processing

TI have a Mitsubishi wd62 diamond vision dlp tv and I am getting a message that says - digital link cannot be established - can anyone help answering why this won't go away as everything is working fine?
by brokentvguy on May 12th, 2009 | no answers | in More Digital Light Processing

I have a 60" mitsubishi hi-def dlp television, When I turn the tv on I have no picture but do have sound and after about a minute the television turns itself off.
by daniel on May 9th, 2009 | 3 answers | in More Digital Light Processing

I have Thomson 44DLW617 Projection TV with a dvi-hdtv input port anyone no if it is compilable with sky hd
by tnucsafc on May 2nd, 2009 | no answers | in More Digital Light Processing

Where i can i find an inexpensive mitsubishi rear projection lenticular and fresnal screens model wd-62528
by cliffwells on April 20th, 2009 | one answer | in More Digital Light Processing

On turning on my year and a half old samsung dlp Mod. # HL-S5086W, the screen comes on hazy with a heavy blue tint - sometimes the picture is upside down. After I turn it on and off a couple of times it sometimes comes on correctly. Any suggestions.
by Anonymous on April 16th, 2009 | 3 answers | in More Digital Light Processing