- NEW!
Maintaining and repairing auto and truck engines
I was driveing my 2003 ford explorer it has 4.0l the check engine like came on and started to flash then it went off
by dvaidm on May 25th, 2012
|
one answer
|
in Check engine light and other indicator lights
Can biofuel foul out lifters?
by Answerbag Staff on May 20th, 2011
|
3 answers
|
in Car and truck engine maintenance
Which diesel is the best in your opinion? Cummins, Powerstroke, or duramax?
by 383Corvette on May 17th, 2012
| 2 people like this
|
3 answers
|
in Car and truck engine types
What is a three-angle valve job?
by Answerbag Staff on August 30th, 2010
|
4 answers
|
in Car and truck engine maintenance
Where is the ecm located on a 1993 GMC Vandura?
by liljon1234 on May 16th, 2012
|
one answer
|
in Engine stalling
What type of oil does a Honda Civic hybrid use?
by Answerbag Staff on May 19th, 2011
|
one answer
|
in Car and truck engine maintenance
I have a 98 chevy 5.7 vortec I've changed fuel pump injection spider filter cap rotor plugs wires mass air sensor n its still misfiring
by jimidale on May 13th, 2012
|
3 answers
|
in Engine stalling
How much air does a 20g turbo flow?
by Answerbag Staff on May 13th, 2011
|
one answer
|
in Car and truck engine maintenance
is it worth it to change my car oil?
by MHfreak1991 on May 12th, 2012
| 2 people like this
|
6 answers
|
in Car and truck engine oil
What does a turbocharger do?
by Answerbag Staff on May 3rd, 2011
|
2 answers
|
in Car and truck engine maintenance
I have a 93 ford F150 5.8/351 engine how can I tell if I got a Cleveland or a Windsor
by Anonymous on May 9th, 2012
|
no answers
|
in Car and truck engine types
What is a tank engine?
by Answerbag Staff on May 2nd, 2011
|
4 answers
|
in Car and truck engine maintenance
1995 Jeep Wrangler 2.5L: What causes chirping sound when turning at slow speeds?
by NOGIMMZ on May 1st, 2012
|
no answers
|
in Strange engine noises
Will a VTEC Honda Civic engine fit in my Honda Prelude?
by Answerbag Staff on August 26th, 2010
|
2 answers
|
in Car and truck engine types
where is the ignition control module on a 1998 ford contour
by babs64 on April 30th, 2012
|
one answer
|
in Ignition control module
What are the indications of a bad mass air flow sensor?
by Answerbag Staff on May 17th, 2011
|
one answer
|
in Car and truck engine maintenance
Have you ever blown a piston
by ChelseaLee on April 27th, 2012
| 3 people like this
|
5 answers
|
in Car and truck engine maintenance
Where is the air mass sensor located on a Ford F150?
by Answerbag Staff on May 14th, 2011
|
one answer
|
in Car and truck engine maintenance
why would the security light keep coming on a blinking on a 2000 pontiac grand am and you have to wait 10 minutes to start it?
by rose11169 on April 18th, 2012
|
one answer
|
in Car and truck engine maintenance
What should my oil pressure be on SBC?
by Answerbag Staff on May 13th, 2011
|
one answer
|
in Car and truck engine maintenance
I own a 2000 Chrysler Sebring LXi. I recently changed my oil and mistakenly put 10w40 oil in instead of 5w30. Will this harm the 2.5lt V6? I live in Mo. the weather here goes from one extreme to the other. It gets hot&humid in the summer, and cold in the winter.
by mysebring on April 8th, 2012
| 1 person likes this
|
3 answers
|
in Car and truck engine oil
What is the catalyst in a catalytic converter?
by Answerbag Staff on May 10th, 2011
|
one answer
|
in Car and truck engine maintenance
I am buying a 1992 Pontiac Grand Am for $400. It runs but when put in gear it stalls unless you add some gas. what could be the problem?
by VladimirX on April 5th, 2012
|
3 answers
|
in Engine stalling
Where is the fuel pressure regulator in a 1998 buick regal?
by Answerbag Staff on May 15th, 2011
|
one answer
|
in Car and truck engine maintenance
where do you locate the thermostat in a 2006 mini cooper
by dzylizzz on April 1st, 2012
|
no answers
|
in Car and truck engine maintenance
What is the fuel pressure needed for a fuel injected motor?
by Answerbag Staff on May 12th, 2011
|
one answer
|
in Car and truck engine maintenance
Malibu 2002 will not start until I do a 10 min wait even though passlock / security has been disabled and the anti theft light always on.
by ofedal12 on March 31st, 2012
|
one answer
|
in Auto engine troubleshooting
Where is the blower motor resistor located on a 2000 Chevy pickup?
by Answerbag Staff on May 11th, 2011
|
one answer
|
in Car and truck engine maintenance
I have two engine oil questions for the car mechanics and enthusiasts. Please see description:
by cloudman on March 28th, 2012
| 1 person likes this
|
3 answers
|
in Car and truck engine oil
What is the difference between 23&18 degree cylinder heads?
by Answerbag Staff on May 8th, 2011
|
one answer
|
in Car and truck engine maintenance
where can i find the wiring schematic for 1998 ford ranger 5 speed automatic transmission
by CURTISDMCCOY on March 24th, 2012
| 1 person likes this
|
one answer
|
in Car and truck engine maintenance
What is a car distributor cap?
by Answerbag Staff on May 1st, 2011
|
one answer
|
in Car and truck engine maintenance
how much diesel does it take in a petrol car to make it break down?
by oscareo on March 23rd, 2012
| 1 person likes this
|
2 answers
|
in Car and truck engine oil
What does sfi stand for in an engine?
by Answerbag Staff on April 29th, 2011
|
one answer
|
in Car and truck engine maintenance
98 malibu 3100 changed intake gasket thermostat waterpump bleed radiator checked fans still overheating no oil or water where it shouldnt be
by patricia.hylton on March 9th, 2012
|
3 answers
|
in Overheating
What are the symptoms of a bad Ford mass air flow sensor?
by Answerbag Staff on May 10th, 2011
|
one answer
|
in Car and truck engine maintenance
my car will fire up then die and wont start again. what should i check first.
by BDM on March 5th, 2012
| 4 people like this
|
5 answers
|
in Auto engine troubleshooting
What is the timing degree for a 1989 ford ranger 2.9?
by Answerbag Staff on May 7th, 2011
|
one answer
|
in Car and truck engine maintenance
how much does a 6.5L v8 Chevy engine cost in America , 8.7L v10 cost in dollars
by Allen_N2926 on March 4th, 2012
|
no answers
|
in Turbocharged and supercharged engines
What should the fuel pressure be on a 5.7 liter engine?
by Answerbag Staff on May 7th, 2011
|
one answer
|
in Car and truck engine maintenance
My truck starts to bog down the neutral to start it again but it's getting worse?dies. I have to put it in
by CAM2311 on March 2nd, 2012
|
no answers
|
in Car and truck engine maintenance
i have a 97 silverado with 5.7 engine. when i let off the gas it keeps going. have replaced throttle position sensor . still does it.
by jwray1954 on February 29th, 2012
|
3 answers
|
in Auto engine troubleshooting
WHAT CUBIC INCH IS ON A SMALL BLOCK ENGINE WITH THE NUMBER VO575TMD
ON THE BLOCK?
by CKOLLEY on February 26th, 2012
|
no answers
|
in Car and truck engine types
Oil change indicator wont go off Oil and filter already changed tried to reset according to manual it's still on. I own a 2007 Suzuki XL7.
by kyle93 on February 15th, 2012
|
one answer
|
in Car and truck engine oil
Will my car pass a state inspection with a bad motor mount?
by russharv63 on January 30th, 2012
|
3 answers
|
in Auto engine troubleshooting
Do you ever smoke? How do you feel about smoking in general?
by Unintelligent Intelligence on January 26th, 2012
| 7 people like this
|
14 answers
|
in Strange engine noises
what are the steps to removing the fuel injectors from my 1997 ford explorer?
by UZIMAKI1120 on January 26th, 2012
|
one answer
|
in Car and truck engine maintenance
Are you cool if you own a leather jacket ?
by ChelseaLee on January 19th, 2012
| 2 people like this
|
7 answers
|
in Check engine light and other indicator lights
I HAVE A 99S10 WITH A 4.E ENG 4W/D AUTO.AT 35-40 ENG SURGES 100RPM,IF I GIVE IT A LITTLE GAS IT GOES ON FINE. IDLE-GOOD.NEED HELP
by bleed1 on January 19th, 2012
|
no answers
|
in Auto engine troubleshooting
99s10 4.3 eng,ecm serges 100rpm at 35-40mph,give it gas goes on fine,idle good.what is problem?
by bleed1 on January 19th, 2012
|
no answers
|
in Auto engine troubleshooting
What is it like to start a car made in 1981?
by Tondoteottotote on January 19th, 2012
| 1 person likes this
|
7 answers
|
in Auto engine troubleshooting
rebuilding my 97 sbc 350 vortec i get fire from coil to cap but nothing coming out the cap to plug wires repaced cap an rotor stil nothing
by BrianJWright on January 14th, 2012
|
3 answers
|
in Auto engine troubleshooting
How is motor oil made?
by Weyloony on January 4th, 2012
| 1 person likes this
|
5 answers
|
in Car and truck engine oil
could a bad thermostat be the reason for no heat in the cab of my chevy siverado?
by gasman1970 on January 1st, 2012
|
one answer
|
in Auto engine troubleshooting
Is your car being stupid atm too?
by Stephaneeza on December 29th, 2011
| 4 people like this
|
8 answers
|
in Auto engine troubleshooting
What do you hear in the background?
by Weyloony on December 28th, 2011
| 12 people like this
|
23 answers
|
in Strange engine noises
When's the last time you checked the Engine oil and coolant in your car?
by Stephaneeza on December 24th, 2011
| 4 people like this
|
10 answers
|
in Car and truck engine maintenance
______ is a warning sign.
by Banana Breath plays the piano on December 23rd, 2011
| 4 people like this
|
13 answers
|
in Check engine light and other indicator lights
Would a problem with the Throttle Position Sensor cause a car's engine to stall?
by TheBellRinger on December 21st, 2011
|
4 answers
|
in Car and truck engine maintenance
Why do all these Ford guys say Ford makes/ownes Cummins? When they don't and never have!
by 2DodgeTrucks on December 21st, 2011
| 1 person likes this
|
3 answers
|
in Car and truck engine types
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!
