Cables and connections.

I plugged an old HD into the ribbon that connects my disc drive. However when it is plugged in the disc drve doesn't work. Can I have both?
by Anonymous on December 2nd, 2011 | 2 answers | in Cables and connections

How do I hook S-video from a PC to a TV?
by Answerbag Staff on June 9th, 2010 | one answer | in Cables and connections

Is it at all possible to connect an LCD DVI-D 24+1 pin port to a VGA graphics port?
by cmpr on August 6th, 2011 | one answer | in Cables and connections

Is it possible to make a video input to usb adapter out of just a a/v cord and a usb cable?
by Jonny_F9737 on May 28th, 2011 | one answer | in Cables and connections

IDE or SATA?
by -O-uknow on December 29th, 2010 | one answer | in Cables and connections

ethernet cable outer layer broken, so shows inside wires, are not damaged, will that affect other peoples internet in the house?
by Steve_B4766 on December 1st, 2010 | 3 answers | in Cables and connections

Composite video converted to 3.5mm audio plugged into a computer's audio input and decoded into live video feed.. program (THANKYOU)
by ethan35t on August 15th, 2010 | no answers | in Cables and connections

I want to extend my three speaker computer system. Will regular speaker wire work? If not what will and where can I get it?
by healthcaregrunt on June 13th, 2010 | one answer | in Cables and connections

How do I hook S-video from a PC to a TV?
by Answerbag Staff on June 9th, 2010 | one answer | in Cables and connections

How to connect pc to tv with HDMI cable?I try many times,it does't work,or the tv has no voice and image.
by lucifer01 on April 6th, 2010 | no answers | in Cables and connections

Hi, I have a DishTV digital satellite receiver which I have connected to my HP Touchsmart, but I can't seem to pick up a signal.
by ebreading on December 31st, 2009 | one answer | in Cables and connections

how do i get my pictures off my cell phone onto my computer to print out
by annielj on December 14th, 2009 | one answer | in Cables and connections

Can a DVI cable replace a monitor cable and is it High Definition?
by Anonymous on November 20th, 2009 | one answer | in Cables and connections

Having trouble connecting acer desktop to speakers, nothing fancy just two externals- one connects to other then to computer. I tried different ports @ back of tower to no avail- any suggestions?
by chi-town on November 14th, 2009 | no answers | in Cables and connections

Is there such thing as a Component RCA to Composite RCA connector or something?
by YellowAxe5 on October 27th, 2009 | one answer | in Cables and connections

If I have a VGA to RCA cable and the RCA output cable is red, green, and blue, can I still use this to connect to a normal TV with just a yellow video input? This is the cable i have: http://bit.ly/VGA-to-RCA-Cable
by YellowAxe5 on October 27th, 2009 | one answer | in Cables and connections

How to add Internal lighting system in coolermaster HAF 922? http://www.digitalstormonline.com/template_HAF922.asp?type=SD3 http://www.digitalstormonline.com/comploadsaved.asp?id=341238 Hi I am planning to build a high end gaming pc. I want to ch
by vinumaan on October 27th, 2009 | one answer | in Cables and connections

What is the purpose of the magnet that is around some cables. Look in the center of this picture.
by Barkley Hound on October 8th, 2009 | one answer | in Cables and connections

I have a HP Docking station (KP081AA) on which two laptops are connected and 1 monitor, k/b & mouse are used to control them. I need to add a desktop to this. im looking for a compatible KVM switch so that a common mon., k/b & mouse to control all three
by winsmathew on September 26th, 2009 | no answers | in Cables and connections

Would I be able to use an internal four port SATA RAID PCI card for just using it for a DVD burner, Blu ray burner, ect...? Because Im already using my other six motherboard SATA ports for RAID 5 on six HDD's.
by The.Unknown47 on September 13th, 2009 | one answer | in Cables and connections

Can I use an internal four port SATA RAID PCI card for just using it for a DVD burner, Blu ray burner, ect...? Because Im already using my other six motherboard SATA ports for RAID 5 on six HDD's.
by The.Unknown47 on September 12th, 2009 | no answers | in Cables and connections

Can I use an internal four port SATA RAID IDE card for just using it for a DVD burner, Blu ray buner, ect...? Because Im already using my other six motherboard SATA ports for RAID 5 on six HDD's.
by The.Unknown47 on September 12th, 2009 | 3 answers | in Cables and connections

Which component is connected between the main board and the usb jack on an M-Audio Ozone Midi Keyboard?
by Miguel Loco on September 5th, 2009 | no answers | in Cables and connections

>I have a PC connected to Sam-sung 22" LCD >monitor (dvi2dvi). now, I like to setup another >monitor next to this (dvi2VGA) and display >different program. is it possible to connect them > both through a single dvi port. > thanks
by Anonymous on September 4th, 2009 | one answer | in Cables and connections

What cables do I need to play my MP3+G karaoke from my laptop to my tv and my amp?
by Ductape on September 1st, 2009 | one answer | in Cables and connections

Can I run a pc with IDE HDD with both IDE and SATA DVD drives if the motherboard has both types available?
by sglass72396 on August 16th, 2009 | one answer | in Cables and connections

Can I install a SATA dvd writer on a computer that now has 2 IDE writers, also is there an adapter cord that I can use?
by melman on July 29th, 2009 | one answer | in Cables and connections

I have a PC Vaio VGC-RC110G. I also have dual Dell Monitors on this comouter. I want to connect my Vizio HDtv VX20L to my computer. The cables I have connect with the TV but I do not know how to connect to the PC. There is no available pla
by Ninivagg on July 27th, 2009 | no answers | in Cables and connections

I cant see the usual input on the back of a PC housing for my monitor. * see http://ibee.tripod.com/pc.html for a photo of the back. How do I connect it?
by eonstar on July 19th, 2009 | 2 answers | in Cables and connections

How to connect a monitor to a pc
by eonstar on July 19th, 2009 | no answers | in Cables and connections

I have a pulse dialling system and my modem has lost its ability to generate pulses. I can't get a new modem or get this one repaired. I can dial my ISP on a handset. Does anyone have a suggestion about how I can connect my software to the line?
by fred flintstone on July 12th, 2009 | 2 answers | in Cables and connections

Any one know what pieces I need and where to buy the pieces needed to connect a female DA-15 plug to a female DE-9 plug on the computer?
by Steel Fire on July 9th, 2009 | no answers | in Cables and connections

I got an old Saitek X36F and X35T, but I can plug it to my computer. To do so I would need a DE-9 to DA-15 Cable or a MiniDIN-7 to Din-5 Cable. Does any one know where I could buy them?
by Steel Fire on July 8th, 2009 | no answers | in Cables and connections

I found a HDMI cable labled "HDMI V1.3 Cable For PS3" I want to buy. Does this mean it can ONLY be used with a PS3 or will I be able to use it to connect my laptop to my TV?
by Individas on May 23rd, 2009 | one answer | in Cables and connections

What is the best way to keep chargers and different cables in the same box and keep them from tangling?
by 1337 on April 29th, 2009 | one answer | in Cables and connections

When iam connecting through bluetooth from my mobile to pc, it was asking for pass code. what is pass code? can u help me? can u tell the procedure to create this pass codes on both laptop and mobiles?
by sree on April 18th, 2009 | one answer | in Cables and connections

How do you connect a remote "enter key" button (with wire) to a PC?
by Gary on April 4th, 2009 | 2 answers | in Cables and connections

I need a wireless router so I can use my home PC and my wi-fi laptop. I have a Altell wireless internet card ......a Huawei EC168. I have tried 3 wireless routers. Nothing seems to work.........
by babydoll on March 19th, 2009 | no answers | in Cables and connections

Simulator for working of Bi directional Shift Register
by Rahul Verma on March 12th, 2009 | no answers | in Cables and connections

Have a Dell XPS M1710 and i want to connect to my pioneer plasma PDP427OXA does anyone know what lead to use?? Sounds and Visuals! Cheers
by vickyphilips on March 9th, 2009 | one answer | in Cables and connections

Is it worth getting a webcam to use on a computer that is with dialup? how will the reception be? any help would be appreciated.
by bubbles on March 2nd, 2009 | 6 answers | in Cables and connections