Bubble Jet.

I have an S400 that won't print. It has a new pint head, the cartridges are canon and half full, it moves across teh paper in tune to the text but the paper is blank.
by Frank on December 4th, 2009 | 2 answers | in Bubble Jet

by Anonymous on December 31st, 1969 | no answers | in

Name of the first computer printer
by Udaykumar on November 25th, 2009 | one answer | in Bubble Jet

CANON S9000. I noticed the last print was discolored and did a cleaning cycle/nozzle check. The printout was clear but showed uneven number of "bars" in photo cyan. The print head alignment showed cyan wasn't coming out solid. Need to replace the head?
by artistjane on November 21st, 2009 | no answers | in Bubble Jet

Should i use bc-01 with my canon bj-200ex will it make my printer go bad over time?
by slingdaddy on September 25th, 2009 | one answer | in Bubble Jet

Im bidding for a canon bjc-4300 colour bubble jet printer, it says it doesnt have toner cartridges, what are these? and why do i need them?, new to computers so please help me understand what this means thanks x
by gemmac on October 21st, 2008 | 2 answers | in Bubble Jet

Canon I-350 printer: Bought new ink cartridges, ran head cleaner and print head alignment, but when I print anything with color, I get blue and yellow, but no red. Last time I used it was 6 months ago. Any suggestions(besides get a new printer)?
by MG1942 Has a Life Penguin on September 9th, 2008 | 2 answers | in Bubble Jet

Ive got water all over my friends printer. dried it out, it wont turn on. what should i do next?
by Yanstari on August 14th, 2008 | 2 answers | in Bubble Jet

My Cannon S400 got a error msg...it blink 6 times oranges light. What does this mean? How should I go about to solve it?
by tippster168 on May 23rd, 2008 | one answer | in Bubble Jet

How do you change the ink on a Canon BJC-2110 printer?
by inkers on May 12th, 2008 | one answer | in Bubble Jet

What would you do if you were trapped in a bubble and you were quickly floating up and away?
by KaykAy101 on March 13th, 2008 | 2 answers | in Bubble Jet

My cannon bjc4300 is printing bigger than the size font i have selected and prints off the page all my dimentions are correct and the font size is 10 what is going on?
by Anonymous on August 12th, 2007 | no answers | in Bubble Jet

Who can help me for my printer canon bjc2100sp is death
by Yudha88 on May 2nd, 2007 | one answer | in Bubble Jet

MY CANON I950 WON'T PRINT THE REDS
by Anonymous on April 24th, 2007 | 2 answers | in Bubble Jet

Canon BJC-2110 printer that starts to spool,then I get an error msg "Printer not responding". Connected to my computer through USB, and have verified that the port is correct. Resinstalled driver-same problem. Install on separate computer-same problem.
by TimKell on March 26th, 2007 | 2 answers | in Bubble Jet

I got a used Canon BJC 4300, which came with software, but I lost it in a move. I do not have the internet to download it onto my computer. Is it possible to buy the software somewhere?
by wendyc on January 2nd, 2007 | 3 answers | in Bubble Jet

My bjc-4300 bubblejet printer is printing rows of colored lines instead of printing text. all ink cartridges are new.?
by Tamani on December 18th, 2006 | one answer | in Bubble Jet

I need a carrage for my canon bjc 85 printer, where can I find one? I have ink but my print carrage is bad.
by jodihousd on December 18th, 2006 | 2 answers | in Bubble Jet

How do I clean my Canon BJC-2110 printer and where are the waste tanks located?
by genenan on August 3rd, 2005 | one answer | in Bubble Jet

I have a Canon BJC 4300. The printer was idle for several months prior to the installation of the new cartridge and now just prints globs of ink on each line. I have cleaned the nozzles several times. What else I can do?
by clayton thomas on June 24th, 2005 | one answer | in Bubble Jet

My Canon BJC 2110 printer has a new print head that came with color and black ink together. When I print a document, all I get is color and black squares where the text should be. How can I fix this?
by VIETVET68 on June 8th, 2005 | one answer | in Bubble Jet

My Canon BJC 4300 won't print. It says that the BubbleJet on IPT1 does not recognize the cartridge. How do I fix this problem?
by Tiffany Guglielmo on June 5th, 2005 | one answer | in Bubble Jet

I replaced the color tanks (not the carriage) on my Canon BJC6000, but it doesn't print in color despite numerous deep cleanings. Will this problem go away if I buy the whole unit?
by Kevin Graves on March 7th, 2005 | one answer | in Bubble Jet

When using my Canon BJC 2100SP printer on Mac OSX, I get an error message saying "wrong cartridge," i.e. not colour, but I only use black. So I can't print. What should I do?
by John Gale on March 4th, 2005 | 2 answers | in Bubble Jet

My Canon BJC-2110 does the printing process but doesn't put ink on the paper. I've changed cartridges and replaced the ink holder, but nothing works. What's wrong?
by Stacy Raichlin on February 14th, 2005 | 2 answers | in Bubble Jet

On a Canon BJC-4000, the "ON LINE" light keeps flashing and I get error messages when I try to print, though the drivers and connections are all okay. How can I fix this?
by Donna DeJoode on January 8th, 2005 | one answer | in Bubble Jet

My Canon BJC only prints about every third line. The cartridges have been replaced and cleaned several times. What could be wrong?
by Judith Wing on November 2nd, 2004 | one answer | in Bubble Jet

My Canon BJC-2110 printer is printing lines through the words. What could be wrong?
by Mary Feimster on October 27th, 2004 | one answer | in Bubble Jet

My Canon BJ 100 printer prints the first sheet just fine, but then the 2nd sheet starts in the middle of the sheet, and it gets worse with each sheet. What could be the problem?
by candy on March 29th, 2004 | one answer | in Bubble Jet