What is Answerbag?

Ask questions and share your knowledge with the world here on Answerbag. Get the best answers where there are no duplicate questions and questions are always open - our community of over 1,142,000 will find your answer!

Join For Free!
 

How to Use a PCMCIA Card Stand Alone

Friday, August 21, 2009
Related Tags: pcmcia | card | installation | device | external
 

Instructions

  • Step 1:
    Attach the USB cable (or other connector cable) to the external PCMCIA card reader device.
  • Step 2:
    Plug the other end of the cable into the computer or laptop. Allow the operating system to locate the drivers for the USB ports. Depending on the device, the operating system may also find and install driver for the external PCMCIA card reader device.
  • Step 3:
    Insert the installation CD into the CD/DVD drive. (Note: Depending on the model of the hardware, an installation disc may not be necessary.)
  • Step 4:
    Click "OK" to install the software.
  • Step 5:
    Verify the installation location. Click "Browse" and navigate to a new folder to change the installation location.
  • Step 6:
    Click "Finish" after the progress bar has completed and installation has concluded.
  • Step 7:
    Test the external PCMCIA card reader device by inserting a PCMCIA card. If the card registers on the operating system, the card reader is installed properly.

Photo/Video Credit

Lacey USB Card Readers

Related Content

No results external were found.