|
|
How to Jump Start a Truck Battery
Thursday, March 12, 2009
InstructionsThings You’ll Need:- Jumper cables
Truck battery charger
Rubber gloves
With Jumper CablesStep 1: Ask someone with another large truck or van to give you a jump; preferably a vehicle that is bigger than yours. This is because most trucks and vans have more powerful batteries as compared to cars.Step 2: Park the other truck facing and adjacent to your truck so that the two batteries are closest to each other. If you can't, most jumper cables are long enough to accommodate two trucks that are parked right next to each other.Step 3: Turn off the other truck and remove the keys from both trucks. Grab your jump cables (with your rubber gloves on, if possible) and connect the positive (red) side of one of the connectors to the red side of your truck battery. Then connect the negative (black) side to the other side of the battery. The red and black sides of the battery are usually designated by color or with a positive or negative sign.Step 4: While assuring that you keep the other two connectors completely separated, bring them over to the other truck and do the same thing (red to red/positive side and black to black/positive side).Step 5: Have the other truck owner get in and start his truck up. Allow the truck to run for a few minutes, and then have the other truck owner rev the engine a few times.Step 6: Get in your truck and start it up.
With a Truck Battery ChargerStep 1: Purchase a truck battery starter. Make sure that the product specifically states "truck" as some chargers don't come with enough power to give a truck a start. You can get these at your local auto parts store, at a trucking service station, or online.
Remove the keys from the truck.Step 2: Connect the positive connection to the red side of your truck battery, then the negative side. Turn on the battery charger and allow it to charge up for a few minutes.Step 3: Ask a friend to hold the charger up so that it won't fall from its position. Get into the truck and start it up.
Tips & Warnings- If you have an auto road service, they will jump start your truck for you. Be sure to let them know that you need to jump start a truck; not a car. They will most likely need to bring a different type of charger to give you a successful jump.Keep your truck battery charger with you at all times, and be sure to charge it up frequently (just plug it into an electrical outlet).In both cases, allow your truck to run for 10 to 15 minutes after the jump start.
Related Content
There are a few more variables involved when jump-starting a dual battery-equipped diesel truck than there are a single battery-equipped vehicle. And if you're trying to jump-start a diesel using a...
In case you do not already know, the battery for your Dodge Stratus is not accessible through the engine compartment. It is located in the driver's side front wheel well. However, you do not need...
Jumping a car is a relatively simple process. When your battery does not contain sufficient power to start your car, you use jumper cables to borrow that power from an outside source. There are two...
It's happened to everybody, sometimes you forget to turn off a light in your car after you've parked it for the day. When you come back, it doesn't start. What happens next? You get a jump start....
|
- Relationship advice
- Brain teasers, trivia & jokes
- Random questions
- And much more!
go