- NEW!
by bagicide stayed 10 months too long on November 3rd, 2009
Coil, coil wire... I'm assuming you have current from the battery? On a car that old, it isn't that uncommon to have oil all over the place, which can keep the negative cable from making contact, depending on where it attaches to the frame or block.
i have a 93 acura integra 1.8l dohc and it will turn over but no spark or fuel i have replaced pretty much everything but the ecu
by Justin_H on September 19th, 2010
| 1 person likes this
1992 Honda/Acura Integra ZXI Radiator Fans Stopped Working?
(Works fine if by-passing the sensor straight to battery)
by ToyBoy on January 9th, 2012
| 1 person likes this
My 1992 Acura Integra is having a problem with the key in the ignition. I can slide the key into the ignition and start the car with no trouble, but when turning the engine off, the key frequently won’t come out easily, even after using WD-40.
by odin0406 on January 23rd, 2009
| 1 person likes this
cant remove the crankshaft pulley from 1988 acura integra i cant find a tool and my snap on impact isnt enough
by blohmg on August 4th, 2010
| 1 person likes this
How do i run my speedometer cable
by arbitraryaxe on October 11th, 2008
| 1 person likes this
You're reading My 1990 Acura, Integra has no spark, resulting in failure to turn on. What are the common possibilities? I have changed the distributor cap, rotor and spark plugs. No results yet!
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!
Comments