- NEW!
by Marks_A_Lot on July 17th, 2009
Rarely are natural gas pipes cleaned. The residue in the pipe is a combination of heavy hydrocarbons and sulfur conpounds that tar out over the life of the pipe. There is also moisture which in that environment can cause rust/scale to form from the pipe corrsion. So if the scaling is heavy it is assumed the pipe is corroded and the pipe is generally replaced verses cleaned. But unless the pipe is 30 years or older there should be no reason unless you are using your own natural gas supply system. Natural gas suppliers are required to maintain gas quality at a pretty tight specification especially for home commercial use.
My gas oven does not work but the burners do. Why does the oven not work?
by volt on November 3rd, 2009
| 1 person likes this
Do natural gas pipes ever need to be cleaned on the inside?
by temporary name on July 13th, 2009
| 3 people like this
Frigidaire I hit self clean by mistake then canceled, I opend the door then found the latch wont retract. Oven wont close.
by carolbe on October 5th, 2009
| 2 people like this
I have a hotpoint stove how do i light the pilot in the oven
by nasak1 on July 10th, 2009
| 1 person likes this
Hi how do i check the operating pressure on a natural gas hob. ive been told that the operating pressure can be anything from 21mb + or - 2, testing it from the injector on the biggest ring.
by spooner on October 7th, 2009
| 1 person likes this
You're reading Do natural gas pipes ever need to be cleaned on the inside?
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!
Comments
Thanks :D
by temporary name on July 18th, 2009