RedJohn’s answer to, "I have Hafler DH 300 Mono Power Amp 840 watts max.I am Trying to hook it up to see if it works,But don't know how."

I have Hafler DH 300 Mono Power Amp 840 watts max.I am Trying to hook it up to see if it works,But don't know how.The back of the
amp has 2 red plug knobs with + and - and a fuse
on each side.Were do those plug into on reciever?reciever is rated 290wats

What you probably have is a bridged version of the Hafler DH-200 amp. The DH-200 was a 2-channel power amplifier rated at 100 W/channel in normal operation and 300 W bridged. Note that bridging a 2-channel amplifier converts it into a single-channel or mono amp. The Hafler DH-series amps were available in kit form and individual owners may have modified their amps from the original (factory) configuration. Your amp may also be another Hafler DH-series amp that has been bridged.

The DH-series stereo amps had two pairs of binding posts for speaker connections: one pair for the left channel and one for the right. Each pair was colour-coded: red for +ve and black for -ve. When operated as a bridged amplifier, only one speaker is used and it is connected across the two red (+ve) binding posts. The black binding posts are not used and may have been removed by the amp builder.

Inputs were provided by a pair of RCA female connectors. Only one input is used when the amp is bridged. The second RCA connector might have been removed by the amp builder.

The fuses were located between the input (RCA) and output (binding posts) connectors for each channel.

You can connect a line-level output from your receiver, if it is so equipped, to the input of the Hafler using a standard RCA interconnect. Since this is a mono amp, only one speaker can be connected to it. Unless your receiver provides line-level outputs, you really have no use for this amplifier. And unless you have two of these amplifiers, it can only useed for driving a centre-channel speaker in a surround-sound system or a passive subwoofer.

Comments

More Questions. Additional questions in this category.

Question

I have Hafler DH 300 Mono Power Amp 840 watts max.I am Trying to hook it up to see if it works,But don't know how.The back of the
amp has 2 red plug knobs with + and - and a fuse
on each side.Were do those plug into on reciever?reciever is rated 290wats

Answers. Showing one answer.

Comments

Did this answer your question? If not, then ask a new question or create a poll.

More Questions. Additional questions in this category.

Follow us on Facebook!

Related Ads

Related Questions

I purchased a 1000W stage subwoofer to add to my home theater. My reciever has an RCA output which is supposed to hook to a POWERED sub. What do I need between the reciever and the sub? Do I need a pre-amp, power amp, or both? What wattage for the amp?

I HAVE A ONKYO RECEIVER THAT PUTS OUT 130 per channel and klipsch speakers. Two f3(150 watts max and 600 watts peak), one center c2(100 watts max and 400 watts max), and two surround s1(50 watts max and 200 watts peak) How can I integrate an amp for power

I Have two SVC 2ohm subs, each rated 300watts rms(500 thermal power handling),should i set them up in parallel to my 500watt mono amp?

Can I plug my dvd/video output into my 20 watts/4 ohms/10 in. Peavey bass amp using a rca to 1/4 in plug? Will it hurt the speaker/amp? I know it's a practice bass amp so I'm not planing to turn it up that much, just to get

I have two mtx 12s that are (together) rated 1800 watts max, and im trying to hook them up to a sony 1200 watt amp, but when i turn up the amp, the subs stop playing. I can only playing my music loud when the amp is turned all the wa

Professionally Researched

What spark plug is needed for a 5 horsepower Briggs& Straton generator motor?

How do I refinish knobs& door knobs?

How do I plug in my AT&T LG cell phone?

Do you want to allow software such as ActiveX controls& plug-ins to run?

Can you plug an iPod into another computer without iTunes& keep the existing music?

Answerbag.com
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!

Question

I have Hafler DH 300 Mono Power Amp 840 watts max.I am Trying to hook it up to see if it works,But don't know how.The back of the amp has 2 red plug knobs with + and - and a fuse on each side.Were do those plug into on reciever?reciever is rated 290wats

Answers. Showing one answer.

Comments

Did this answer your question? If not, then ask a new question or create a poll.

More Questions. Additional questions in this category.

Follow us on Facebook!

Related Ads

Related Questions

Professionally Researched

Answerbag.com Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!

I have Hafler DH 300 Mono Power Amp 840 watts max.I am Trying to hook it up to see if it works,But don't know how.The back of the
amp has 2 red plug knobs with + and - and a fuse
on each side.Were do those plug into on reciever?reciever is rated 290wats

Answerbag.com
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!