- NEW!
by hammertoes5828 on July 9th, 2008
On my 1993 Ford 3.8 engine I have an oil light that stays on all the time. One answer was just twist the wires together and the light would go out. My problem is I only have one wire going into the sensor.I removed the sensor and cleaned out the old pigtail that was all chewed up and rotted. There was a center pin in the sensor and I used an allagator clip on the center pin and the sensor wire but nothing The light is still is on. Any more ideas? Thanks Guys
What is the location of the throttle position sensor on a 1995 Ford Taurus?
by Answerbag Staff on August 17th, 2010
| 1 person likes this
Where is the catalyst temp sensor on a Ford Taurus?
by Answerbag Staff on August 17th, 2010
| 1 person likes this
Where is the OBD connector on the 1993 Ford Taurus?
by Answerbag Staff on August 5th, 2010
| 1 person likes this
My '03 Taurus speedometer moves when stopped, will jerk and have instrument panel light up and might cut off while in gear. Suggestions?
by brmcclelland on April 2nd, 2011
| 1 person likes this
Do you like the new Ford Taurus sleek design?
by socialist22 on April 14th, 2011
| 1 person likes this
You're reading I have a 1993 Ford Taurus. On the bottom of the oil pan there is a drain plug and above the drain plug is a sensor or some kind The wire broke off and now the oil light stays on. Could this be the problem why the light is on all the time?
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!
Comments