- NEW!
Help answer this question below.
From what I read it sounds like a relay problem. The relays are in a black box up under the dashboard and to the right of the steering column. There is a strip of black tape on it that you have to peel off. The window relay is at the top on the left. For reference, there should be a large relay at the bottom of the set of relays. That is for your ignition tone. The relay costs about $8.00, buy it from autozone or advance auto and return it if it is not your problem.
put car stereo in 04grand prixGTP, bare wire sparked, lost power door locks,AC, dash gauges, fuses in side pannel were fine, relay maybe?
by metroman1972 on July 11th, 2010
| 1 person likes this
how do you hook up a winegard 5 in 3 out video distribution switch box
by mayflwr on June 16th, 2010
| 1 person likes this
Why are cars designed so that replaceable parts are so inaccessible instead of somehow a modular approach?
by -O-uknow on July 11th, 2010
| 1 person likes this
Anyone have the wiring diagram for the Powerstop trailer brakes?
I'm taking one off of my old truck and putting it on my new.
by WOMPUS on July 19th, 2010
| 1 person likes this
how to replace a wheel stud on a 1994 honda passport 4x4
by wtf0303 on October 19th, 2010
| 1 person likes this
You're reading My 1995 ford explorer power windows and door locks don't work. Also, the 4WD high & low lights blink. The 30 amp fuse that goes in the box under the hood that controls it, blows as soon as I try to put it in. Upon testing it's showin
Comments
I am not sure if this resolved the problem for the person who asked this question or not, but it sure helped me. I had three of my windows down and couldn't get them up. I found the black box, jiggled the relay and was able to get all three to roll up. I pulled the relay and will replace tomorrow. Thanks. You probably saved me a couple hundred dollars.
by Hopper on May 30th, 2009